


Intercooler Kit for NISSAN GT-R R35.
Large capacity core with carbon air guide will greatly improve cooling performance. The carbon air guide has premium looking. Even though the core has larger capacity, weight of the intercooler unit is lighter than stock. Performance level is much higher than other manufactures' products, which are just slightly larger than stock intercooler.
Cooling performance
- Although performance of stock intercooler is good, it is just good for stock boost level. At boost 1.2k (GT570 Kit, GT600 Kit), temperature of compressed air will be increased. (Cause: Since stock core size is not enough for the flow capacity of stock turbochargers.) To improve cooling performance, larger core is required. After performance tests, if the core size is just slightly larger, there is not so much performance improvement. To achieve great performance enhancement, the large size (Size: 400x260x65) & thin core was selected.
Lightweight
- Intercooler unit is lighter than st
Pressure loss
- To prevent pressure loss due to the thin core, the new inner fin design will minimize pressure loss.
Affection to water temperature
- Large capacity core tends to affect to air flow for radiator. With the thin core, air flow speed to radiator will be increased. During tests at Sendai Highland Circuit and Fuji Speedway by a professional racing driver, increasing of water temperature was the same level as stock system.
Special large carbon air guide
- The shape of the air guide fits to the core size. Induction air flow goes through efficiently to the core that enhances cooling performance. The side air guide plate guides air to radiator as well.
(The carbon pattern is mat twill weave cloth.)
| Vehicle | Model | Engine | Model Year | Type | Core Size?Location | Type | Remarks |
|---|---|---|---|---|---|---|---|
| GT-R | R35 | VR38DETT | 07/12-16/06 | R type INTERCOOLER | 400X260X65?2?Front mount | Can't install carbon air guide for 2011 spec. Can install to a left?hand drive car. Not checked for SPEC V. |
JDM to US License plate adapter bracket
A simple solution for mounting US plates on a JDM car. Don't drill holes in your license plate or your bumper! This simple plate bolts into the JDM plate frame and allows you to attach your US plate. It even comes with some nice stainless hardware and fancy washers!
Contact Us
Please fill out the form below and we’ll get back to you within 24 hours.