Head Gasket Rb25De(T)
| Category | Engine | Parts Number |
| 87.0-1.2mm | RB25 | TA4070-NS06A |
| 87.0-1.5mm | RB25 | TA4070-NS06B |
| 87.0-1.8mm | RB25 | TA4070-NS06C |
Descriptions:
Tomei began operations in 1968 as a race car tuner in Japan. Over the last 40 years Japan has emerged as one of the leaders in automotive research, racing, and culture. Tomei products have been utilized in nearly every motor sport imaginable. Tomei's racing heritage means their research and design team have first hand knowledge of the extreme demands racing puts on an engine. Using only the highest quality materials means that Tomei's products can handle the intense strain and heat a purpose built engine will experience whether it be on the street or the track. Tomei's attention to detail is second to none. All of their products are thoroughly researched and engineered to achieve optimal efficiency. Because of even miniscule differences in measurements can cause catastrophic engine failure, all Tomei products fall within strict tolerances. Tomei machines all of their engine components to enhance airflow and ensure proper fitment and seal.
With the increase in combustion pressure from performance engines in recent years, the burden placed on the head gasket has grown tremendously. To maintain the highest precision possible in a high performance assembled engine strict measurements and maximum sealing is required with the right torque values on each head studs and bolts are required to keep everything together to gain the most out of your engine. When bolts are screwed into place, regardless of the bolt type and strength qualities of that bolt, the pressure is always on the first 3 threads of the screw which takes the most stress. If the cylinder block is badly distorted then the screw threads can be damaged as well. Stud bolts with dynamic designs allows the screw bolt to take on equal stress on all threads which will greatly secure maximum sealing pressure for race and airplane engines. Since the cylinder capacity can fluctuate with the thickness of gasket used, the compression ratio can be adjusted with the thickness of the gasket. The gasket thickness will help with the final adjustments to get your setting closest to the target compression ratio.
Stainless steel was chosen as the head gasket material because of the heat conductivity efficiency of stainless steel to evenly distribute the heat and aid with cooling. This will greatly improve reliability and reduce the chances of a blown head gasket.
The natural high tensile qualities of Stainless Steel greatly increases the joint rigidity of the cylinder head with the cylinder block. This helps minimize the chances of the engine warping when under severe stress loads that performance engines go through when running high power applications. The result is improved durability and added power gains.
1. TA4070-NS06A
Features:
- Increased engine durability
- Greater heat resistance
- Improved reliability
- Stainless steel construction
2. TA4070-NS06B
Features:
- Increased engine durability
- Greater heat resistance
- Improved reliability
- Stainless steel construction
3. TA4070-NS06C
Features:
- Increased engine durability
- Greater heat resistance
- Improved reliability
- Stainless steel construction
WARNING: Cancer and Reproductive Harm
Head Gasket Rb25De(T)
| Category | Engine | Parts Number |
| 87.0-1.2mm | RB25 | TA4070-NS06A |
| 87.0-1.5mm | RB25 | TA4070-NS06B |
| 87.0-1.8mm | RB25 | TA4070-NS06C |
Descriptions:
Tomei began operations in 1968 as a race car tuner in Japan. Over the last 40 years Japan has emerged as one of the leaders in automotive research, racing, and culture. Tomei products have been utilized in nearly every motor sport imaginable. Tomei's racing heritage means their research and design team have first hand knowledge of the extreme demands racing puts on an engine. Using only the highest quality materials means that Tomei's products can handle the intense strain and heat a purpose built engine will experience whether it be on the street or the track. Tomei's attention to detail is second to none. All of their products are thoroughly researched and engineered to achieve optimal efficiency. Because of even miniscule differences in measurements can cause catastrophic engine failure, all Tomei products fall within strict tolerances. Tomei machines all of their engine components to enhance airflow and ensure proper fitment and seal.
With the increase in combustion pressure from performance engines in recent years, the burden placed on the head gasket has grown tremendously. To maintain the highest precision possible in a high performance assembled engine strict measurements and maximum sealing is required with the right torque values on each head studs and bolts are required to keep everything together to gain the most out of your engine. When bolts are screwed into place, regardless of the bolt type and strength qualities of that bolt, the pressure is always on the first 3 threads of the screw which takes the most stress. If the cylinder block is badly distorted then the screw threads can be damaged as well. Stud bolts with dynamic designs allows the screw bolt to take on equal stress on all threads which will greatly secure maximum sealing pressure for race and airplane engines. Since the cylinder capacity can fluctuate with the thickness of gasket used, the compression ratio can be adjusted with the thickness of the gasket. The gasket thickness will help with the final adjustments to get your setting closest to the target compression ratio.
Stainless steel was chosen as the head gasket material because of the heat conductivity efficiency of stainless steel to evenly distribute the heat and aid with cooling. This will greatly improve reliability and reduce the chances of a blown head gasket.
The natural high tensile qualities of Stainless Steel greatly increases the joint rigidity of the cylinder head with the cylinder block. This helps minimize the chances of the engine warping when under severe stress loads that performance engines go through when running high power applications. The result is improved durability and added power gains.
1. TA4070-NS06A
Features:
- Increased engine durability
- Greater heat resistance
- Improved reliability
- Stainless steel construction
2. TA4070-NS06B
Features:
- Increased engine durability
- Greater heat resistance
- Improved reliability
- Stainless steel construction
3. TA4070-NS06C
Features:
- Increased engine durability
- Greater heat resistance
- Improved reliability
- Stainless steel construction
WARNING: Cancer and Reproductive Harm
BUILT FOR ENTHUSIASTS.
BACKED BY REAL NUMBERS.
.
BACKED BY REAL NUMBERS.
Supporting Nissan owners with everything from essential repairs to their next big build.
Connecting Nissan enthusiasts near and far, sharing a passion for these cars and the parts that keep them going
From routine maintenance to hard-to-find upgrades, find the right parts for your Nissan
Need help?
Frequently Asked Questions
Check the application, part number, and fitment notes in the product description before ordering. If you are unsure, contact NizmoPartsPlug with your vehicle model, chassis code, year, engine, and any relevant modifications. Include your VIN or frame number and existing part number when available so we can help confirm the application. Similar-looking parts are not always interchangeable.
Availability varies by product. Review the listing for in-stock, special-order, preorder, or backorder details. If the status is unclear, contact us before placing your order so we can confirm availability and the expected sourcing timeline. Special-order and preorder items may need to be sourced after you order. Backordered and made-to-order parts can have variable lead times; do not assume immediate dispatch.
Review the product listing for shipping and pickup restrictions. Items marked PICKUP ONLY are not available to ship. Some fragile, rare, or oversized parts are restricted to in-person collection. Other products may offer both shipping and pickup. For pickup-only items, contact us before ordering to confirm the pickup location and arrange collection.
We accept returns within 30 days of delivery on unused, uninstalled items in original packaging. A 20% restocking fee applies to eligible returns. Certain items are non-returnable, including electronic parts, special orders, and installed parts. Defective or incorrect items must be reported within 7 days. For full details, please review our Return Policy page before purchasing.
Once your order ships, you'll receive a confirmation email with your tracking number and a link to track your shipment in real time. You can also track your order anytime by visiting the Order Status page using the link in your confirmation email. If you haven't received tracking info within 2–3 business days of your order, please contact us at Nizmopartsplug@gmail.com and we'll look into it right away.
OFFERS RUN NOV. 6–30, 2026
BLACK FRIDAY DEALS END IN
Customer Reviews
See what people are saying



