AEM's 340LPH High Flow In-Tank Fuel Pump is designed for high performance, naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and a high volume of fuel flow for a very competitive price.The AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information.This fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, end cap and rubber buffer sleeve.
Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.AEM fuel pumps include a universal pre filter which may not fit certain vehicle applications. Please refer to the OEM recommendations for filter replacement for your vehicle.Your vehicle's factory fuel pump wiring may not be adequate enough to handle the current draw of AEM's High Flow Fuel Pumps.
Please refer to the Electrical Requirements section in the instructions document for proper wiring.
TECHNICAL SPECS: Weight: 12.5oz (354grams)Outside Diameter: 39mm ODExternal Materials: Black plated steel with laser etchingInlet Fitting: 7.7mm ID, 11.0mm OD. Offset InlineOutlet Fitting: 8 mm hose clamp. OffsetPRV Activation: 80 PSIImpeller Design: Single Scroll Ceramic TurbineVOLTAGE SPECS:Connector Terminal: 6 mm Spade (pos/neg)Min Voltage Input: 6 voltsMax Voltage Input: 18 voltsCurrent Draw (40 psi): 12 amps (13.5v)Current Draw (80 psi): 15 amps (13.5v)Fuse: 20 amps (13.5v)* Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
Features:
Designed for high output naturally aspirated and forced induction EFI vehicles
In-tank design
Tested to flow 340 lph @ 40 PSI
39mm diameter fits most applications
Offset inlet design eases installation
Each pump individually tested
For gasoline vehicles
Kit includes fuel pump, rubber sleeve and end caps, pre filter and flying lead
AEM's 340LPH High Flow In-Tank Fuel Pump is designed for high performance, naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and a high volume of fuel flow for a very competitive price.The AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information.This fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, end cap and rubber buffer sleeve.
Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.AEM fuel pumps include a universal pre filter which may not fit certain vehicle applications. Please refer to the OEM recommendations for filter replacement for your vehicle.Your vehicle's factory fuel pump wiring may not be adequate enough to handle the current draw of AEM's High Flow Fuel Pumps.
Please refer to the Electrical Requirements section in the instructions document for proper wiring.
TECHNICAL SPECS: Weight: 12.5oz (354grams)Outside Diameter: 39mm ODExternal Materials: Black plated steel with laser etchingInlet Fitting: 7.7mm ID, 11.0mm OD. Offset InlineOutlet Fitting: 8 mm hose clamp. OffsetPRV Activation: 80 PSIImpeller Design: Single Scroll Ceramic TurbineVOLTAGE SPECS:Connector Terminal: 6 mm Spade (pos/neg)Min Voltage Input: 6 voltsMax Voltage Input: 18 voltsCurrent Draw (40 psi): 12 amps (13.5v)Current Draw (80 psi): 15 amps (13.5v)Fuse: 20 amps (13.5v)* Power rating given at 43 PSI, 13.5v at the pump terminal with a BSFC of .5. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.
Features:
Designed for high output naturally aspirated and forced induction EFI vehicles
In-tank design
Tested to flow 340 lph @ 40 PSI
39mm diameter fits most applications
Offset inlet design eases installation
Each pump individually tested
For gasoline vehicles
Kit includes fuel pump, rubber sleeve and end caps, pre filter and flying lead
BUILT FOR ENTHUSIASTS.
BACKED BY REAL NUMBERS.
.
BACKED BY REAL NUMBERS.
Supporting Nissan owners with everything from essential repairs to their next big build.
Connecting Nissan enthusiasts near and far, sharing a passion for these cars and the parts that keep them going
From routine maintenance to hard-to-find upgrades, find the right parts for your Nissan
Need help?
Frequently Asked Questions
Check the application, part number, and fitment notes in the product description before ordering. If you are unsure, contact NizmoPartsPlug with your vehicle model, chassis code, year, engine, and any relevant modifications. Include your VIN or frame number and existing part number when available so we can help confirm the application. Similar-looking parts are not always interchangeable.
Availability varies by product. Review the listing for in-stock, special-order, preorder, or backorder details. If the status is unclear, contact us before placing your order so we can confirm availability and the expected sourcing timeline. Special-order and preorder items may need to be sourced after you order. Backordered and made-to-order parts can have variable lead times; do not assume immediate dispatch.
Review the product listing for shipping and pickup restrictions. Items marked PICKUP ONLY are not available to ship. Some fragile, rare, or oversized parts are restricted to in-person collection. Other products may offer both shipping and pickup. For pickup-only items, contact us before ordering to confirm the pickup location and arrange collection.
We accept returns within 30 days of delivery on unused, uninstalled items in original packaging. A 20% restocking fee applies to eligible returns. Certain items are non-returnable, including electronic parts, special orders, and installed parts. Defective or incorrect items must be reported within 7 days. For full details, please review our Return Policy page before purchasing.
Once your order ships, you'll receive a confirmation email with your tracking number and a link to track your shipment in real time. You can also track your order anytime by visiting the Order Status page using the link in your confirmation email. If you haven't received tracking info within 2–3 business days of your order, please contact us at Nizmopartsplug@gmail.com and we'll look into it right away.
OFFERS RUN NOV. 6–30, 2026
BLACK FRIDAY DEALS END IN
Customer Reviews
See what people are saying





