100% OEM Authentic Nissan Parts
This CANBUS gauge replaces the factory DIN triple meter in your R33 Skyline with 3 fully configurable gauges to take advantage of the CANBUS data stream from your aftermarket ECU. It is made in the USA with the case 3D-printed in temperature-resistant ASA plastic and purpose-designed electronics.
Features :
- Customizable appearances
- Configurable warning levels
- Configuration via IOS or Android App over Bluetooth
- Auto-dimming displays with night mode
- Single DTM 4 pin connector wiring
- Direct replacement of factory unit -- uses factory bezel
Supported ECUs :
- Haltech (CAN protocol v2)
- Link (G-Series)
- Emtron (KV Series)
- AEM Infinity
- MoTeC M1 Series (GPR/GPA/Powertune Australia FW)
- ECUMaster Black Series
Requires a DTM-4 cable for installation
See install instructions for details
Supported gauges
(Requires that your ECU has the appropriate sensors and CAN configuration) :
- Battery Voltage
- Water Temp
- Oil Temp
- Fuel Temp
- Intake Air Temp
- Exhaust Gas Temp
- Water Pressure
- Oil Pressure
- Fuel Pressure
- Boost Pressure
- Air Fuel Ratio
- Ethanol Content
- Injector Duty
- Throttle Position
- Tire Temp/Pressure
- Fuel Tuning (AFR, Fuel Pressure, Injector Duty)
- Engine Health (Oil Temp/Presure, Water Temp/Pressure, IAT, Voltage, EGT)
- Boost Control (Boost vs. Target, Solenoid Duty, Ethanol %)
- Gear Position
- Speedometer
- 5 x Custom Digital Display with 1-7 user-configurable parameters
This CANBUS gauge replaces the factory DIN triple meter in your R33 Skyline with 3 fully configurable gauges to take advantage of the CANBUS data stream from your aftermarket ECU. It is made in the USA with the case 3D-printed in temperature-resistant ASA plastic and purpose-designed electronics.
Features :
- Customizable appearances
- Configurable warning levels
- Configuration via IOS or Android App over Bluetooth
- Auto-dimming displays with night mode
- Single DTM 4 pin connector wiring
- Direct replacement of factory unit -- uses factory bezel
Supported ECUs :
- Haltech (CAN protocol v2)
- Link (G-Series)
- Emtron (KV Series)
- AEM Infinity
- MoTeC M1 Series (GPR/GPA/Powertune Australia FW)
- ECUMaster Black Series
Requires a DTM-4 cable for installation
See install instructions for details
Supported gauges
(Requires that your ECU has the appropriate sensors and CAN configuration) :
- Battery Voltage
- Water Temp
- Oil Temp
- Fuel Temp
- Intake Air Temp
- Exhaust Gas Temp
- Water Pressure
- Oil Pressure
- Fuel Pressure
- Boost Pressure
- Air Fuel Ratio
- Ethanol Content
- Injector Duty
- Throttle Position
- Tire Temp/Pressure
- Fuel Tuning (AFR, Fuel Pressure, Injector Duty)
- Engine Health (Oil Temp/Presure, Water Temp/Pressure, IAT, Voltage, EGT)
- Boost Control (Boost vs. Target, Solenoid Duty, Ethanol %)
- Gear Position
- Speedometer
- 5 x Custom Digital Display with 1-7 user-configurable parameters
Once your order ships, you'll receive a confirmation email with your tracking number and a link to track your shipment in real time. You can also track your order anytime by visiting the Order Status page using the link in your confirmation email. If you haven't received tracking info within 2–3 business days of your order, please contact us at Nizmopartsplug@gmail.com and we'll look into it right away.
We accept returns within 30 days of delivery on unused, uninstalled items in original packaging. A 20% restocking fee applies to eligible returns. Certain items are non-returnable, including electronic parts, special orders, and installed parts. Defective or incorrect items must be reported within 7 days. For full details, please review our Return Policy page before purchasing.
Yes — all parts sold on NizmoPartsPlug are brand new unless explicitly stated otherwise in the product listing. We source genuine OEM Nissan components and authentic aftermarket parts directly from trusted suppliers. If a part is used, refurbished, or a core charge item, it will be clearly noted in the product title and description.
Absolutely — if you don't see the part you need listed on our site, reach out to us at Nizmopartsplug@gmail.com or call us at (908) 265-4568 with the part number and we'll do our best to source it for you. We specialize in OEM Nissan and JDM components and have access to an extensive supplier network. Please note that special order parts may require a deposit and are non-returnable once ordered.
-
Store Pickup
Pickup available at Union, New Jersey
-
FAST Shipping
In Stock orders ship out Quickly
-
Secure Payment
Powered by Shopify and Stripe
Customer Reviews
See what people are saying
ONLY ORIGINAL MAINTENANCE PARTS
USE CODE : "RHDGUYS " AT CHECKOUT SAVE 5% ON MAINTENANCE PARTS
JDM to US License plate adapter bracket
A simple solution for mounting US plates on a JDM car. Don't drill holes in your license plate or your bumper! This simple plate bolts into the JDM plate frame and allows you to attach your US plate. It even comes with some nice stainless hardware and fancy washers!
Contact Us
Please fill out the form below and we’ll get back to you within 24 hours.
