100% OEM Authentic Nissan Parts
2150CC FIC NISSAN SKYLINE RB26 FUEL INJECTOR CLINIC INJECTOR SET (HIGH-Z)
This massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECUs ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.
CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.
Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
2150CC FIC NISSAN SKYLINE RB26 FUEL INJECTOR CLINIC INJECTOR SET (HIGH-Z)
This massive high performance injector is in a class of its own when low end throttle response and short pulse width control is required. State of the art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECUs ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.
Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90 degrees F fuel temperature using CF-16B calibration fluid.
CAUTION! The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
This injector set is precisely matched using Fuel Injector Clinic's proprietary Data Match Technology. Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.
Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90deg F fuel temperature using CF-16B calibration fluid.
Superior short pulse width control and state of the art matching make these injectors easy to tune and provide great drivability.
Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. If you are using aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.
Every injector is covered against failure caused by defects in original manufacture by our lifetime warranty.
This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.
This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications. We do not believe that increasing the chance of a failure due to using remanufactured or core program based injectors is ever warranted.
Frequently Asked Questions
Find answers to common questions about our products and services
Once your order ships, you'll receive a confirmation email with your tracking number and a link to track your shipment in real time. You can also track your order anytime by visiting the Order Status page using the link in your confirmation email. If you haven't received tracking info within 2–3 business days of your order, please contact us at Nizmopartsplug@gmail.com and we'll look into it right away.
We accept returns within 30 days of delivery on unused, uninstalled items in original packaging. A 20% restocking fee applies to eligible returns. Certain items are non-returnable, including electronic parts, special orders, and installed parts. Defective or incorrect items must be reported within 7 days. For full details, please review our Return Policy page before purchasing.
Yes — all parts sold on NizmoPartsPlug are brand new unless explicitly stated otherwise in the product listing. We source genuine OEM Nissan components and authentic aftermarket parts directly from trusted suppliers. If a part is used, refurbished, or a core charge item, it will be clearly noted in the product title and description.
Absolutely — if you don't see the part you need listed on our site, reach out to us at Nizmopartsplug@gmail.com or call us at (908) 265-4568 with the part number and we'll do our best to source it for you. We specialize in OEM Nissan and JDM components and have access to an extensive supplier network. Please note that special order parts may require a deposit and are non-returnable once ordered.
A core charge is a refundable deposit included in the price of select parts. It ensures that your old/used unit (the "core") is returned to us for remanufacturing or recycling. Once we receive your core in acceptable condition, the core charge is fully refunded. The exact core charge amount varies by item and will be listed in the product description. For questions about the core charge on a specific product, please contact us before purchasing and we'll be happy to clarify the amount, condition requirements, and refund process.
-
Store Pickup
Pickup available at Union, New Jersey
-
FAST Shipping
In Stock orders ship out Quickly
-
Secure Payment
Powered by Shopify and Stripe
Customer Reviews
See what people are saying
Item as described. super fast shipping. I highly recommend this item so that shifter gap no longer exists.
Always come in clutch! NPP for your Nissan and Nismo Parts
Hallo hier ist Nick aus Deutschland,
danke für den super schnellen Versand und den klasse Service.
Kann man nur weiterempfehlen.
Lg Nick
Thank you so much. For a girl like me not actually knowing wtf it’s amazing to have someone to have my back when getting parts so I seriously appreciate this avenue of obtaining parts for the car. It’s like you know unlike others when you go to a random store. #skylinelifestyle lol
Dylan worked with my mechanic to help me get a brand new transmission for my car and it needed a lot of extras and he helped my mechanic find what they needed to get the job done. It was awesome. Anytime I need to get a part I just ask him and he’s super helpful. I trust that I’m getting the right part for me car. Thanks a ton.
Dylan and his team are amazing! Always answer all my annoying questions in a fast and accurate manner. Part quality is amazing and shipping happened faster than expected. Will always shop here first!!
The dedication and commitment that NPP provides to customer service is truly unparalleled. Every interaction reflects a genuine willingness to help, and it’s clear that NPP is both highly knowledgeable and passionate about what he does.
I’ve purchased various Nissan parts from NPP, and each one has been of top-notch quality — exactly as described and perfectly suited to my vehicle. The attention to detail, reliability, and professionalism make NPP my go-to source for all things Nissan.
Highly recommended for anyone looking for quality parts and outstanding service!
Dylan is very knowledgeable on all Nissan parts and will take the time to explain and help customers get the right products. Quick response to questions and extremely fast shipping and processing times. The best to go to for all nissan and nismo parts!
ONLY ORIGINAL MAINTENANCE PARTS
USE CODE : "RHDGUYS " AT CHECKOUT SAVE 5% ON MAINTENANCE PARTS
Contact Us
Please fill out the form below and we’ll get back to you within 24 hours.
